MAINTENANCE
- The submersible pump is a maintenance-free, high-quality product. The pump does not require any type of
maintenance during normal operation.
- Before carrying out any inspection or maintenance, switch off the appliance and remove the plug from the
mains socket.
- It is recommended to clean the pump before storage.
- Any deposits that may settle inside the pump should be removed with a stream of water.
Rope control
1. Pull the pump out of the well, borehole or shaft from time to time.
2. Check the rope and replace it if it is damaged.
If the rope is damaged, you can try to carefully pull the pump out of the well, borehole or shaft behind the
pressure line. Under no circumstances do not pull on the cable to connect the pump to the distribution box.
ENVIRONMENTAL PROTECTION
The crossed-out wheeled-bin symbol on the products or accompanying documents means
that used electrical and electronic products should not be mixed with general household
waste. For proper disposal, recovery and recycling, please deliver these products to
designated collection points, where they will be accepted free of charge. Alternatively, in
some countries, you may return your products to your local retailer when purchasing an
equivalent new product. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or
the nearest collection point for further details. Improper disposal of this type of waste may result in penalties
in accordance with national regulations.
