7
Installation Warnings
Please read carefully
The Manufacturer has tried to foresee all possible safety devices to ensure the safety of
the users. However, different conditions of installation can cause situations which cannot
be controlled or foreseen. Therefore, it’s absolutely necessary to evaluate all remaining
risks and to care about the following suggestions:
- This machine is safe only if appropriately connected to an efficient grounding system
complying with the safety standards in force in the Country where the machine will be
installed. The Manufacturer rejects any responsibility for accidents due to the miss
application of the above standards, as a wrong installation may result in injuries to
persons, as well as other problems that may occur in related areas.
- Do not leave packing items such as plastic bags, Styrofoam, nails etc. around because
children or other persons could get injured.
- Any defect or discrepancy has to be notified immediately to the persons authorized for
installation and maintenance of the machine.
- Machine installation has to be performed exclusively by authorized and qualified
technicians.
- Authorized service: if the service is not compliant with the instruction of the
Manufacturer, or is components are other than those recommended by the
Manufacturer used for installation or maintenance of the appliance, the conformity
declaration of the product will be voided, and also the Manufacturer’s warranty
- Possible replacement of the supply cable. If damaged, must be performed immediately
and exclusively by service staff qualified or authorized by the Manufacturer, in order to
prevent any danger to persons.
- Before the connection of the appliance to the fixed installation, verify if a conformity
certificate has been issued to confirm the suitability of the fixed installation for this use; if
not, inform the end user and leave the appliance disconnected.
- Check the integrity of all components and do not install defective or damaged parts.
Ask for substitution.
- Check and verify that the outlet power supply voltage is the same as shown on the
rating-plate of the appliance.
- The customer has to protect the power outlet used to supply the appliance by means of
a safety switch system, complying with the standards and laws in force.
- The installation of a water softener is suitable filter including anti scale properties
required.
- Machine should not be installed with supplying water having hardness degree higher
than 8 French degrees.
- Any unreliable cable connection is forbidden.
- The appliance must be placed over a flat and stable surface, leaving a minimum
clearance of 30 mm from walls.
