Streamline Supplies Butterfly Скачать руководство пользователя страница 13

Страница: 13 / 16

Dismantling and Disposal Of The Machine

The machine can only be dismantled by an authorized technician.

To this purpose, perform the following procedures:

• Remove pressure from hydraulic circuits

• Disconnect the machine from the electrical mains

• Treat potentially harmful fluids and solids appropriately and do

not discard them into the open environment.

• Store the machine in a location which is inaccessible to minors.

• Do not discard into the environment

Technical Data

Mechanical features:

• Supporting structure made of chemically-treated and painted

sheet-steel to prevent corrosion.

• The cabinet lower portion is provided with 4 adjustable

rubber feet to optimize vibrations.

• Front covering panels made of stainless-steel.

• Removable top panel made of stainless-steel, complete with

metallic rails providing function of cup-tray and cover to

protect access to internal tank.

• Close-type drip-tray for collection of group exhausts, made of

stainless-steel.

• Externally-mounted side and rear panels made of:

A) Stainless-steel

B) Chromium-plates sheet steel

C) Epoxy-painted sheet-steel

Dimensions: 320(W) x 450(D) x 430(H) mm

Net weight: 25 kg.

Содержание Butterfly

















Результаты поиска

Содержание Butterfly

Отзывы:

Бренды по названию

Популярные бренды

Streamline Supplies Butterfly, Руководство по эксплуатации

Результаты поиска

Содержание Butterfly

Отзывы:

Бренды по названию

Популярные бренды