STREAMIT INTERNET RADIO
User’s manual
May 2008
Version 1.0
16
3 SIR Configuration – Setup menu
It is possible to use your SIR’s setup menu to manually change configurations of your device. The
menu of your SIR is accessed by pressing the OK and Escape buttons together while the device
is in powered off state. The menu includes Setup and Service options.
3.1 Changing the menu language
You can come to the language menu by entering
the SIR Setup. If you are already in [Setup], press
the Menu-Up button until you reach the
[Language] option. Press OK button to access the
[Language] menu. You can use the Menu-
Up/Menu-Down buttons to browse through the
available languages and use the OK button to
confirm your choice. In this case the chosen
language will be applied and the SIR will return to
the [Language] option.
If you access the [Language] menu, but you
decide not to change the current language of your
SIR, you could press the Escape button, in which
case the SIR will return to the [Language] option
without the language being changed.
3.2 Changing the network setting
Changing the network settings of your SIR radio is done from the Network Setup menu. You can
come to the Network Setup menu by entering the [Setup] and browsing until you find the [Network
Setup] option. Use OK to access this menu. Two options are available, [DHCP] and [Static IP]. In
case you decide not to change the current settings, just press Escape to return.
In case of DHCP, just confirm your choice pressing OK. Your preference will be saved and will be
applied the next time the device will restart (a restart is done when you leave the setup menu).
To assign your device a static IP, choose the [Static IP] option from the [Network Setup] menu
and press OK. A wizard will be started to help you through with the configuration. You can leave
this wizard at anytime by pressing the Escape button. Each section of the wizard (IP address,
Network Mask, Default Gateway, DNS 1, DNS 2) is made of two steps, one step informing you on
what parameter will be changed and the other step is the actual parameter address value. When
editing addresses, the Menu-Right/Menu-Left buttons are used to move the cursor through while
the Menu-Up/Menu-Down are use to respectively increase and decrease the value where the
cursor is placed. When you have entered the desired address, press OK to confirm and follow
with the next section of the wizard. When all of the parameters have been entered, your
preferences are saved and you are given the option to exit the [Network Setup] menu by pressing
OK while Escape will bring you back to the [Network Setup] menu.
