STREAMIT INTERNET RADIO
User’s manual
May 2008
Version 1.0
19
E
N
G
L
IS
H
3.6.1 Turning Keylock ON
You can turn the Keylock ON from the [Keylock] menu
as follows:
Enter the [Setup] and browse until you find the
[Keylock] option. Press OK to access this menu which
allows you to choose between the two available
options; [Keylock OFF] or [Keylock ON].
Press OK to the [Keylock ON] option. This will start a
wizard. The first step of the wizard is only to inform
you that you are about to enter a new PIN to your
device. Press OK to continue with the next step of the
wizard, which is the PIN code. Use the Preset buttons
to enter your PIN, which will consist of 4 digits each
having he value 1-5 (resulting in 625 possible
combinations). At this stage the entered code will be
displayed in the LCD as digits. Use Menu-Left/Menu-
Right to move the cursor and enter new digits will
override the value above the cursor.
Press OK to confirm you PIN code. A screen is
shown to inform you that the Keylock was turned On.
Press OK to confirm and complete the wizard. The
changes are now applied to your device.
You can also exit the Keylock wizard without any
changes being applied by pressing Escape button.
3.6.2 Turning Keylock OFF
The keylock algorithm obeys to a number of rules which means that turning the keylock OFF
would require different steps according to conditions such as entering the right PIN, 10 second
timer expiring etc. In the example below we will only consider the case when the user enters the
right password. Also it is assumed that the user is in the [Setup] menu for less then 10 seconds.
In case the user has not pressed any buttons for 10 seconds in the [Setup] menu, an extra step
would be added; the user would have to enter the PIN one more time.
In case the wrong PIN code is entered at any stage, a ‘Wrong PIN’ warning is shown and the user
is asked to enter the PIN code again. This would loop until the right PIN is entered.
