Page 8
The status page
This is the status screen which shows the following information:
Status information:
External IP
The IP-address on which the SAS100 can be reached from outside the network
MAC serialnumber:
Physical address of the ethernet interface of the product.
Ip number:
Address where the product is known within the local network.
Time / Uptime:
10:26:10 up 5 min indicates that at 10h26 the product has been used for 5 minutes.
Load average indicates the avarage processor load.
Software version:
Version of the current firmware.
Bytes sent:
Amount of bytes which have been send to the network.
Stream information:
Per audiostream (maximum 2) the following information is given:
Stream 1:
The encoder which is used for the stream (in this example 40 kbit/s Mono)
Stream title 1:
The name of the stream as indicated when listening to this stream with a PC software
program like Winamp.
Stream ports:
Indicates the ports associated with this stream
Stream 1 URL:
Address which should be used with a local connected PC to listen to the audiostream. In
this example:
http://192.168.2.110:8000/lukas
. By clicking on this link, – when installed -
Winamp should start on your PC.
When the internal Icecast server is used, its status can be checked by pressing the URL of the icecast Status Page.
But now we will configure the product by pressing on the Netwerk button.
