Page 6
The first-time configuration of the product
To configure the product, a laptop or PC is required.
Connect the laptop or PC to the router.
The product uses DHCP configuration by default. You can easily check in your router which IP address has been
assigned to the product. See for an example the figure below:
In this example the product “Streamit SAS100” got address 192.168.2.47. This address is also shown on the status
page of the product, see further on in this manual.
If you cannot view this screen, you always can access the audio encoder/streamer through IP address 10.0.0.254.
Start the webbrowser of you PC and enter the following URL: <address product>. In this example: 192.168.2.47.
The following screen will be shown:
