Streamit Lisa Compact Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 109

background image

Lisa Compact

82

18

Remote software update (RSU)

The Lisa features Remote Software Update (RSU). When the device starts up and the RSU feature has
been enabled, it will first check if a new software version is available. When that is the case, the device
will automatically update to the new version (certain conditions may apply, see

When will Lisa device(s)

update automatically

).

The Remote Software Update feature can be enabled for all devices. Whether Remote Software Update
is enabled, depends on the operation mode/where the device gets its configuration from. In the coming
section we describe how your device(s) need to be programmed in order to make use of the RSU
feature.

By default the Lisa will update its software from the Streamit update server.

18.1

Streamit Device Portal

When your device has been programmed to get its configuration from the Device portal, the RSU
feature can be switched on and off in the Device portal. When this feature has been enabled, your
device will automatically update to the latest version on the Streamit update server or to the version on
your own update server, depending on how this is configured in the Streamit Device portal.

If for any reason you would decide to update the software of your device to a different version, please
use the

Lisa Configuration Tool

. Note that the device will update back to the version on the provider’s

update server if RSU is enabled and the device resets. You can prevent this by disabling the RSU on the
Device portal. Preferably this is done before loading the different software version in the Lisa.

18.2

When will Lisa device(s) update automatically

The behavior of the Remote Software Update feature depends on the software that is present in the
device when the update is performed as well as on the software that is available on the server.

Under normal operation, the software in the device will be Release Software. This will only update when
the software on the update server is Release Software. You will not by accident end up with Beta
Software when using the Remote Software Update. However, there may be reasons to 'retract' a release
and therefore the device will downgrade to an earlier version, if Release Software with a lower version
number is placed on the update server.

Beta Software will only be required when Streamit staff will inform you about this. They will then also
provide you the necessary information to install this.

18.3

Forcing an update to a particular version

The Lisa will never automatically update to Beta software when running Release software. In order to
circumvent the automatic update rules and perform a remote software update that upgrades the Lisa
from Release software to Beta software, an unconditional update task can be executed. This is
described in section

Command overview list

.

«
...
80
81
82
83
84
...
»

Содержание Lisa Compact














































































































Отзывы:

Нет отзывов

Похожие инструкции для Lisa Compact

Бренд: B&B Electronics Страницы: 73

Бренд: B&B Electronics Страницы: 4

Бренд: Gama Sonic Страницы: 4

Бренд: R&S Страницы: 60

Бренд: National Instruments Страницы: 45

Бренд: CYP Страницы: 38

Бренд: Vicon Страницы: 18

Бренд: Lika Страницы: 2

Бренд: Karma Страницы: 2

PowerClean Salt Econ

Бренд: CMP Страницы: 24

Бренд: Logicform Страницы: 5

Бренд: Kramer Страницы: 12

Бренд: tams elektronik Страницы: 68

Бренд: Lindy Страницы: 2

Бренд: Hall Research Technologies Страницы: 24

SM-Universal Encoder Plus

Бренд: Control Techniques Страницы: 112

Бренд: Kiloview Страницы: 50

Бренд: Kings Audio Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды