Streamit Lisa Compact Скачать руководство пользователя страница 86 | Manualshive

Страница: 86 / 109

background image

Lisa Compact

86

20

Useful tools

20.1

Lisa Configuration Tool

The Lisa Configuration Tool (LCT) is a Windows PC software program that communicates with the Lisa
over USB. It provides the following features:

·

Device configuration, with easy to use templates for using the Lisa with Streamit Device portal,
Streamit Audio Distribution Platform, your own platform, or standalone operation

·

Software update

·

Device monitoring & control

The Lisa Configuration Tool can be downloaded from the Streamit site in the download section and is
available free of charge.

The Lisa Configuration Tool needs to be installed and started at least once, before the USB cable is

connected. At startup the Lisa Configuration Tool will check and install drivers if required. Only after the
drivers have been installed, the Lisa can be connected to the PC using a USB A to USB Micro-B cable.

Detailed device monitoring

When a connection is available between the Lisa and the

Lisa Configuration Tool

(LCT), the Lisa

constantly sends log messages which are displayed in the monitoring window of LCT. The LCT interface
is the same for all Lisa devices. This monitoring has much greater detail than can be derived from the
regular platform-based monitoring (see

).

Sending commands and reading settings

With the Lisa Configuration Tool you can program the Lisa and send commands to control the Lisa
(e.g., power on, play a stream).

To program settings and control the operation of the Lisa, the Lisa Configuration Tool sends textual
commands to the Lisa. In return the Lisa will send back a textual message to indicate whether the setting
was applied.

For most settings, the current setting can be read by issuing the command without the parameters. For
example, to see which Telnet settings are used, the command '

telnet

' (without the quotes) can be used.

When the Lisa receives the command, it returns the current value of the setting.

In

Command overview list

the complete list of commands is documented, including examples. A device

reset may be required to apply changes in settings. The “reset” will power the Lisa Compact device
back on. The Lisa needs to be powered on after a "reset", using the “pw 1” command .

«
...
84
85
86
87
88
...
»

Содержание Lisa Compact














































































































Отзывы:

Нет отзывов

Похожие инструкции для Lisa Compact

MediaLounge DSM-520

Бренд: D-Link Страницы: 127

DivX Connected DSM-330

Бренд: D-Link Страницы: 38

Бренд: NAD Страницы: 2

Бренд: NAD Страницы: 2

Бренд: Srne Страницы: 38

Бренд: Generac Power Systems Страницы: 64

Бренд: Trace Engineering Страницы: 2

CIMR-XC2 Series

Бренд: YASKAWA Страницы: 77

Бренд: Peachtree Audio Страницы: 56

Бренд: Lumantek Страницы: 14

Бренд: My Cable Mart Страницы: 4

Бренд: W&T Страницы: 12

Бренд: BSPH Страницы: 36

FL MC 10BASE-T/FO G850

Бренд: Phoenix Contact Страницы: 7

VARIOMAT 2 11MM

Бренд: Calpeda Страницы: 64

Бренд: Votek Страницы: 33

Бренд: Goobay Страницы: 8

BRAVO ST 230 VAC

Бренд: Helios Power Solutions Страницы: 39

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды