Streamit Lisa Compact Скачать руководство пользователя страница 100

Страница: 100 / 109

Lisa Compact

100

223 Device tries to start a content update without having terminated the previous instance of the

content update [internal error]

226 No URLs are available for streaming. Configuration is not yet completed or device could not

connect to configuration resource.

227 Insufficient data is read for stable playback from the card. Re-buffering will follow with audio

silence during re-buffering.

228 Invalid playlist ID requested, playlist content is invalid, or there is no audio content available for the

playlist entries

230 Proxy server requires authentication from device

Errors

405 Remote software update failed to complete

406 No data read or received from configuration resource

407 Playlist inside (an online) playlist is not supported

408 Online playlist references file on the card, but card is not present

410 EOF reached for a file on the card that is referenced by online playlist

411 File that is referenced by online playlist is not found on the card

412 DNS retries have failed (device will try again, except for content update task)

413 Connection retries have failed (device will try again, except for content update task)

414 Too many redirects (device will try again, except for content update task)

415 Bad responses (or timeout) from server (device will try again, except for content update task)

416 Access to a web resource is denied by the server, e.g. because of invalid credentials

417 Requested content file not found on the card

418 Attempt to start a playlist which is already in use [internal error]

419 Maximum number of open files supported by the OS was reached [internal error]

420 Device needs to perform card related functionality (e.g., play content from card), but card is not

present

421 Failure to allocate requested memory for card functionality [internal error]

422 Card present in the device, but not useable

Содержание Lisa Compact














































































































Результаты поиска

Содержание Lisa Compact

Отзывы:

Похожие инструкции для Lisa Compact

Бренды по названию

Популярные бренды

Streamit Lisa Compact, Руководство пользователя

Результаты поиска

Содержание Lisa Compact

Отзывы:

Похожие инструкции для Lisa Compact

Бренды по названию

Популярные бренды