Strand Lighting ClassicPalette, Руководство по установке и настройке

Страница: 73 / 90

Light Palette
Using the Keypad to Select Channels
65
L
IGHTING
C
ONTROL
C
ONSOLE
I
NSTALLATION
& S
ETUP
G
UIDE
2. Using the Keypad to Select Channels
To Select Channels Using Keypad:
Step 1. At keypad, enter number of channel(s) you wish to select. (Typing will be reflected in the Command Line.)
Step 2. Use + (And), / (Through) and - (Minus) keys to select groups of channels.
Step 3. Press [@] or [*] on the QWERTY keyboard to set a level in percent.
Step 4. Enter percentage value. If you enter a single number, it will be multiplied by 10 (example: pressing [5]
[ENTER] results in 50%).
Step 5. Press [ENTER] to complete the action.
Notes:
• Alternately, you can select channels and roll the wheel to increase or decrease their level from the current position.
• Holding down [SHIFT] while rolling the wheel, changes the values in Decimal rather than Percent.
• To set a level of 5%, enter [05] [ENTER].
• Use the [@] [LOOK] syntax to open the Apply Levels dialog box to reference pre-recorded Looks as palette refer-
ences.
Note: For more detailed instructions, refer to "Command Line Syntax" in the LIGHT PALETTE Software Help
Menu .
Note: Make sure the Num Lock key is on before using the numeric keypad.
3. Using the Mouse to Select Channels
Note: For more detailed instructions, refer to "Using the Mouse to Select Channels and Levels" in the LIGHT
PALETTE Software Help Menu .
To Select channels Using Mouse:
Step 1. Position mouse pointer on channel number and left-click. Red outline will appear.
Step 2. Select multiple channels with mouse by left-clicking on first channel, holding left button down, and
dragging mouse to last channel in group.
Step 3. Use mouse wheel to change level of selected channels.