Strand Lighting ClassicPalette, Руководство по установке и настройке

Страница: 36 / 90

Light Palette
L
IGHTING
C
ONTROL
C
ONSOLE
I
NSTALLATION
& S
ETUP
G
UIDE
2 8
BUTTON DETAILS
12. Halt / Back
• The [HALT/BACK] button will halt any running cues on its cue list. A cue is running when the Green LED on the
GO button is flashing.
• If a cue list is halted (flashing Red LED), pressing this button again will back up the cue list.
• If the cue list is Releasing, both the [GO] and the [HALT/BACK] LEDs will be flashing.
• [Shift] + [Back] will go to the previous cue in recorded time.
13. Load
• Press [LOAD] then the desired Cue number to load a cue.
• Press [S4] to load the entire State of the cue (all the cumulative levels that got you to the look on stage at that point
in the cue list).
• Edit the cue by changing levels, adding channels or releasing channels.
• Either press [UPDT] to Update the Loaded cue (watch the Loaded Pink Bubble at the bottom of the screen) or
press [REC] to record it as a new Cue or Look.
• Press [LOAD] [LOOK] then the desired Look number to load a Look for editing.
14. Look
• Press [LOOK] then # [ENTER] to put the channels in a particular Look at their recorded level.
• Alternately you can set them to a level using the keypad by typing [LOOK] # @ Level [ENTER].
• Press [REC] then [LOOK] then a number to record a look.
• Press [REC] then a bump button to quickly record a look to a master (if set up to do so).
• Groups are stored as Looks, even if the levels are not used.
Halt / Back
Load
Look