Strand Lighting ClassicPalette, Руководство по установке и настройке

Страница: 40 / 90

Light Palette
L
IGHTING
C
ONTROL
C
ONSOLE
I
NSTALLATION
& S
ETUP
G
UIDE
3 2
BUTTON DETAILS
25. Shift
• Use with [RECORD] to open the Record dialog box.
• Use with [REL] to restore previously released channels.
• Use with [REL PB] to release all cue lists.
• Use with [EDIT] to enter the time display.
• Use with [STEP FORWARD/BACKWARD] buttons to go to the top or bottom of a cue list.
• Use with [ARROW KEYS] to select a range of cells with the Blue Box.
• Use with [PREV] to select the previous channel to the current one
or use with [PREV] in dialog boxes to move the
focus of the current control.
• Use with [GOTO] to open the Goto dialog.
• Use with [GO] to assert the appropriate cue list.
• Use with [BACK] to advance to the previous cue in cue time.
• Use with [MOVE] to move Looks.
• Use with [COPY] to renumber cues.
• Use with [BLIND] to enter or exit Blind mode.
• Use with [UP] or [DOWN] to adjust the selected channel’s level by one percent.
• Use with Split Crossfaders or Single Crossfaders (A/B C/D fader setup under [
S3 ] Hardware Setup) to manually
move backwards through a cue list.
• When the command line is empty, holding down [SHIFT] and rolling the encoder wheel will scroll the channel
grid.
• Use after pressing [REC] and before pressing [BUMP] or [SELECT], or [5X5] to keep Record dialog box open for
labeling.
26. Softkeys
The Softkey buttons are context sensitive to what you are doing. When no dialog boxes are open, they provide
additional functionality that is not available with the hard buttons on the console. When a dialog box is open, the
LEDs show you what buttons are used to jump to specific controls (lists, check boxes etc.). You can always see what
each button will do by reading the bubbles at the bottom of the screen. The LED will blink showing you what control
currently has focus.
SHIFT
S1 S2
S3 S4 S5 S6
S7
S8 S9 S10 S11 S12
M1 M2
M3 M4 M5 M6
M7
M8 M9 M10 M11 M12
Example of Screen Display