Strand Lighting ClassicPalette, Руководство по установке и настройке

Страница: 19 / 90

Light Palette
Connecting Console Components
11
L
IGHTING
C
ONTROL
C
ONSOLE
I
NSTALLATION
& S
ETUP
G
UIDE
HOOK-UP
1. Connecting Console Components
To connect console components, do the following:
Step 1. At console rear panel, connect power supply cord (included).
Step 2. Connect monitor or touchscreen (sold separately).
Step 3. Install gooseneck lamps (sold separately).
Step 4. Connect PS2-compatible peripherals (i.e. mouse, keyboard, etc.).
Step 5. Connect USB-compatible peripherals as needed.
Figure 2-1: Console Rear Panel
2. Connecting to System
The console provides four standard XLR 5-pin connectors for connecting to DMX512 devices. Each connector
supports one DMX512 universe of 512 DMX channels. Connect DMX512 devices as shown in
Figure 2-1 .
External Trigger Input
A switch closure trigger input is available at the console’s back panel. This connector supports any compatible device
which can trigger the dry contact closure. The trigger function is user-configurable using the LIGHT PALETTE
software interface. The trigger input connector is wired as shown in
Figure 2-2 .
Note: Trigger setup is done via [S3] Hardware Setup. Refer to LIGHT PALETTE software Help Menu for details.
Figure 2-2: External Trigger Connection
Network
XLR
Power
Gooseneck Lamp Gooseneck Lamp
USB
Host
USB
Aux
External
Trigger
USB
Monitor or
Touchscreen
RS-232
PS2
USB
HOST
USB
AUX EXTERNAL
TRIGGER
3 2 1
Triggering
Trigger Connections
Trigger 1 Short pins 1 & 2
Trigger 2 Short pins 1 & 3
Pin Description
1 Common
2 Trigger 1
3 Trigger 2