STOVES Sterling R1100E, Руководство пользователя и инструкция по установке

Страница: 35 / 48

cleaning
• To remove the glass panel, open the
door wide, hold the top and bottom edges
and slide out.
• Warning: DO nOT operate the appliance
without the glass panel correctly fitted.
• For your safety, glass door panels are
made of toughened glass. This ensures
that, in the unlikely event that a panel
breaks, it does so into small fragments to
minimise the risk of injury. Please take care
when handling, using or cleaning all glass
panels, as any damage to the surfaces
or edges may result in the glass breaking
without warning or apparent cause at
a later date. Should any glass panel be
damaged, we strongly recommend that it
is replaced immediately.
Shelf Runners
• Shelf runners can be removed to
enable you to clean then thoroughly.
Make sure they are cool to touch and then
grasp the runners and slide out of their
hanging holes.
elecTRic HOB
ceramic glass hobs
• The ceramic hob top can be cleaned
using a clean, damp cloth or kitchen
paper. Please ensure that the elements
are cooled fully to avoid steam burns.
• You can use a specialist ceramic
cleaner to restore the surface, but use
sparingly to avoid coating the hob top too
thickly. Too much cream cleaner will lead
to discolouration. Use a dry, clean cloth to
polish the surface.
• For stubborn marks, a specialist hob
scraper can be used.
• Do not use steam cleaners.
• Regular cleaning will prevent any salts
or minerals from accumulating on your
hob and discolouring the glass.
Solid plate hobs
• Prime and Season - this helps maintain
the finish of the elements.
• Use a damp, clean cloth to wipe the
solid plate, making sure that you follow
the circular grooves and avoid damaging
the red spots. Make sure that you allow
the hotplate to dry before use by switching
on the elements at a low heat.
• You can restore the hotplates by using
a solid plate cleaner but take care to avoid
the red spots on elements.
• To prime: Switch on each element in
turn for a short while (with no pan on it) at
a medium - high setting. This will harden
and burn off the coating.
• To season: Heat the element for 30
seconds at a medium setting then switch
off. Use a minimum amount of unsalted
vegetable oil, on a dry cloth or paper
towel, and apply a thin coat of oil to the
element surface. Wipe off the excess and
heat the element for one minute.
1
CLEANING
REMOVING OVEN PARTS FOR CLEANING
Inner Door Glass
•
The inner door glass panel can be removed for cleaning
but it must be replaced the right way up. If there is any
writing on the glass, you must be able to read it clearly
when the cavity doors are open.
•
Always make sure that the glass is pushed fully into the
Stop position.
•
To remove the glass panel, open the door wide, hold the
top and bottom edges and slide out.
•
Warning: DO NOT operate the appliance without the
glass panel correctly fitted.
•
For your safety, glass door panels are made of toughened
glass. This ensures that, in the unlikely event that a panel
breaks, it does so into small fragments to minimise the
risk of injury. Please take care when handling, using or
cleaning all glass panels, as any damage to the surfaces
or edges may result in the glass breaking without warning
or apparent cause at a later date. Should any glass panel
be damaged, we strongly recommend that it is replaced
immediately.
Shelf Runners
•
Shelf runners can be removed to enable you to clean then
thoroughly. Make sure they are cool to touch and then
grasp the runners and slide out of their hanging holes.