Using the PROgRAMMeR / CLOCK - eLeCtRiC
(if fitted)
to set the time of day
• Press the Up and Down buttons to-
gether for a few seconds, and release.
• The ‘
•
’ in between the numbers on
the LED Display will begin to flash.
• While the ‘
•
’ is flashing it is possible
to adjust the time using the Up and Down
buttons. Once the time has been set, allow
approximately 30 seconds before us-
ing any of the other timer functions. This
ensures that the time will remain correct.
to select an alarm tone
There are three tones to choose from.
• Press and hold the down button to
listen to the first tone.
• Release the down button and press it
again to listen to the second tone etc.
• Releasing the down button after the
tone has sounded will automatically select
that tone.
setting the minute minder
• To set the Minute Minder, press the
Function button once. The bell symbol will
appear and start flashing. The flashing
only lasts for 5 seconds so the time must
be set within this time frame.
• Use the Up and Down button to set
the length of time required. Once this has
been done, the Minute Minder is set.
• When the desired length of time has
counted down the alarm will sound.
• To cancel the tone, press any of the
buttons.
• To cancel the Minute Minder at any
time, press the Up and Down buttons
together.
24
PROGRAMMER / CLOCK
To set the time of day
�
Press the Up and Down buttons
together for a few seconds, and
release.
�
The ‘
�
’ in between the numbers on
the LED Display will begin to flash.
�
While the ‘
�
’ is flashing it is possi-
ble to adjust the time using the Up and
Down buttons. Once the time has
been set, allow approximately 30 sec-
onds before using any of the other
timer functions. This ensures that the
time will remain correct.
To select an alarm tone
There are three tones to chose from.
�
Press and hold the
down
button to lis-
ten to the first tone.
�
Release the
down
button and press it
again to listen to the second tone etc.
�
Releasing the
down
button after the
tone has sounded will automatically
select that tone
Setting the minute minder
�
To set the Minute Minder, press the
Function button once. The bell symbol
will appear and start flashing. The
flashing only lasts for 5 seconds so the
time must be set within this time frame.
�
Use the Up and Down button to set
the length of time required. Once this
has been done, the Minute Minder is
set.
�
When the desired length of time has
counted down the alarm will sound.
�
To cancel the tone, press any of the
buttons.
�
To cancel the Minute Minder at any
time, press the Up and Down buttons
together.
A
24
PROGRAMMER / CLOCK
To set the time of day
�
Press the Up and Down buttons
together for a few seconds, and
release.
�
The ‘
�
’ in between the numbers on
the LED Display will begin to flash.
�
While the ‘
�
’ is flashing it is possi-
ble to adjust the time using the Up and
Down buttons. Once the time has
been set, allow approximately 30 sec-
onds before using any of the other
timer functions. This ensures that the
time will remain correct.
To select an alarm tone
There are three tones to chose from.
�
Press and hold the
down
button to lis-
ten to the first tone.
�
Release the
down
button and press it
again to listen to the second tone etc.
�
Releasing the
down
button after the
tone has sounded will automatically
select that tone
Setting the minute minder
�
To set the Minute Minder, press the
Function button once. The bell symbol
will appear and start flashing. The
flashing only lasts for 5 seconds so the
time must be set within this time frame.
�
Use the Up and Down button to set
the length of time required. Once this
has been done, the Minute Minder is
set.
�
When the desired length of time has
counted down the alarm will sound.
�
To cancel the tone, press any of the
buttons.
�
To cancel the Minute Minder at any
time, press the Up and Down buttons
together.
A
Содержание Sterling R1100E
Страница 1: ...User and Installation Instructions Stoves Range Electric...
Страница 46: ......
Страница 47: ......