STOVES ST980SXS, Руководство пользователя

Страница: 29 / 33

31
Maintenance and Cleaning
Changing the plug
•
This appliance comes fitted with a 13amp plug fitted.
Should you need to replace the fuse, a 13amp ASTA
approved (BS 1362) must be used. Should the plug
itself need to be replaced, the wires in the mains lead
are coloured in accordance with the following code:
ÿ
Green and yellow = Earth
ÿ
Blue = Neutral
ÿ
Brown = Live
•
The wire coloured green and yellow must be connected
to terminal marked with the letter E, coloured green
and yellow or marked with the earth symbol:
•
The wire coloured blue must be connected to the
terminal marked with the letter N, or coloured black.
•
The wire coloured brown must be connected to the
terminal marked with the letter L or coloured red.
•
Upon completion, there must be no cut or stray wire
present and the cord clamp must be secure over the
outer sheath.
Changing the light bulb
Before replacing the light bulb, switch off the electricity
supply to the appliance and un plug the appliance.
Lamp required: 220 – 240V~25W
(fridge only)
Lamp required: 220 – 240V~40W (freezer only)
Lamp holder: E27 (Do not exceed the wattage given for
lamps)
To replace the lamp;
1. Pull the lampshade towards you.
2. Hold up (1) and pull out (2) the lampshade.
3. Rotate the lamp anticlockwise until the lamp is
released.
4. Always replace the bulb with one that is identical.
Bulbs are not covered by any warranty, but can be
purchased at your local hardware store. Remember to take
the old bulb with you if you are unsure of what kind of bulb
to buy.