Using The Programmer / Clock
A
Setting the minute minder
To set the minute minder, touch ‘mode’ once. The bell
symbol will appear and start flashing. The flashing
only lasts for 5 seconds, so the minute minder must be
set within this time.
Use the plus and minus buttons to set the length of
time required. Once this has been done, the minute
minder is set.
When the selected length of time has counted down an
alarm will sound. To cancel the tone, touch any of the
timer pads.
Should you need to cancel the minute minder at any
time during use, touch ‘mode’ once, and then touch the
plus and minus together.
Semi – automatic cooking methods (main oven
only)
The duration method.
(Switch off after a set time period)
Touch ‘mode’ twice, which will skip past the minute
minder.
The display will flash the word
and ‘A’ for Auto
will flash on the left hand side of the display.
Use the plus and minus to set the length of time you
want to cook for. This must be done within 5 seconds
– or the time of day will show again.
Once this is done the oven will switch off when the
cooking time has elapsed, and an alarm will sound. To
switch off the alarm touch any of the touch pads.
To view any remaining time, touch ‘mode’ twice.
The end time method
(Switch off at a set end time)
Touch ‘mode’ three times, which will skip past the
minute minder and the duration method.
The display will flash
and ‘A’ for Auto will flash
on the left hand side of the display.
Use the plus and minus to select the time the oven is
required to turn off.
Once this is done the oven will switch off at the time
you have selected. To switch off the alarm, touch any
of the touch pads for a short period.
To disarm the timer touch ‘plus’ and ‘minus’ together
for a short period.
A
9
