Using The Programmer / Clock
What your timer symbols
mean
i
Function
selector
Minus /
Decrease
Plus /
Increase
This is a 24 hour clock.
Before you use your
appliance for the first
time, you must ensure
that the time of day is
set.
i
Through your programmer you will be able to set the
time of day, the minute minder, and use the semi and
fully automatic cooking functions
with the main oven
.
The programmer is vital to the working of your appli-
ance, and reading this section will make sure that you
get the most out of your oven.
The programmer
The table below shows you what the symbols look like
and what they do.
Setting the time of day
Touch the plus and minus together for a few seconds
and then release.
The ‘
’ in between the numbers on the LED display will
begin to flash.
While the ‘
’ is flashing, it is possible to adjust the time
of day using the plus and minus.
Once the time has been set, allow approximately 30
seconds before using any of the other timer functions.
This will ensure that the time of day remains correct.
Changing the alarm tone
Touch the ‘plus’ and ‘minus’ simultaneously. The ‘
’ in
the centre of the display will flash.
Touch ‘mode’ to display the text "ton" then touch
‘minus’ repeatedly to change the alarm tone.
Symbol
What is it?
Decrease / Minus
Used to decrease cook / end time, remove minutes
from the minute minder and adjust the time of day.
Also used for selecting an alarm tone.
Increase / Plus
Used to increase the cook / end time, add minutes to
the minute minder and adjust the time of day.
Mode
Used to select the functions available on the program-
mer.
Touch once for minute minder.
Touch twice for cook time.
Touch three times for end time.
How to use these functions is explained later in this
section.
8