STOVES 900DFa, Руководство пользователя и инструкция по установке

Страница: 9 / 18

Stability bracket
If the cooker is fitted with a flexible
connection, a stability bracket should
be fitted to engage in the back of the
cooker. A stability bracket can be
bought from your local supplier.
A stability bracket can be fitted as
follows:
1. Place the cooker in position and
draw a
PENCIL LINE
level with the
front edge.
2. Mark the centre of the cooker to give
the
CENTRE LINE
for the bracket.
3. Remove the cooker and mark off
450mm from the
PENCIL LINE
to
locate the front edge of the lower
bracket.
4. Fix the bracket to the floor.
Measure from floor level to
engagement edge in the back of
the cooker and add 3mm.
5. Assemble the underside of the top
part of the bracket to this height.
Levelling
Place a spirit level on a baking sheet
onto an oven shelf.
The cooker is fitted with levelling feet
and locknuts at the front, and wheels
at the rear.
Adjustment of wheel height can be
made with a screwdriver through the
hexagonal hole in the front plinth.
26
Stability bracket
1 Pencil line
on floor
2 Centre
line
3
450
mm
Front edge for
lower bracket
4
5 Underside of top bracket
slots into engagement
edge in back of cooker.
Rear wall
60
mm
INSTALLATION INSTRUCTIONS
Symbol Function / Feature
Conventional Grill page 13
Fanned Grill page 13
Defrosting and cooling page 16
Conventional Oven page 16
Top Heat Only page 16
Base Heat Only page 16
Fanned Oven page 16
Fan and Base Heat Only page 16
Intensive Bake page 16
7
OVEN & GRILL FUNCTIONS