6.5 Air Separation Panel Installation
Once the cabinet’s shelves are configured, the air separation panels must be
installed. The front and rear air separation panels are identical parts, but they
are positioned in different ways depending upon where in the cabinet they are
installed. Install the air separation panels in both the front and rear of the
cabinet as described in Sections 6.5.1 and 6.5.2.
6.5.1 Installing the Front Air Separation Panel
Install the front air separation panel as follows (see Figure 6–4):
1. Install four U-nuts on the air separation panel, as shown.
2. Position the air separation panel just behind the front vertical cabinet
rails, as shown. Position the panel as closely as possible to the top of the
upper-most front cabinet shelf.
3. Fasten the air separation panel to the front vertical cabinet rails with four
screws, as shown.
Figure 6–4 Front Air Separation Panel Installation
LEFT FRONT
VERTICAL
CABINET RAIL
SCREW, SEMS
10-32 x .625
(4 PLACES)
CXO-3930A-MC
AIR
SEPARATION
PANEL
UPPER-MOST
SHELF
U-NUT, 10-32
(4 PLACES)
RIGHT FRONT
VERTICAL
CABINET RAIL
6.5.2 Installing the Rear Air Separation Panel
The rear air separation panel is installed just above the upper-most shelf in
the rear of the cabinet. If CDU A is in this position, the air separation panel is
installed against its front panel. Install the rear air separation panel as follows
(see Figures 6–5 and 6–6):
Installing StorageWorks Shelves 6–7
