INSTALLATION GUIDE
ENGLISH
Code:
ARAD3S
Name:
RACK 3U/270mm universal enclosure
for RACK 19" cabinets
Metallic enclosure for RACK cabinet: CCTV, KD, SSWiN, RTV, LAN
IM ARAD3S
Edition: 1 from 20.03.2017
Supersedes: -------------
EN
1. Intended use:
Due to its design, the ARAD3S enclosure is intended for mounting inside RACK 19'' cabinets. This general-
purpose enclosure may serve as an auxiliary element for integrating CCTV, AC, I&HAS, RTV, LAN systems in RACK 19''
cabinets. It is intended for mounting alarm control panels, AC controllers, power supply units, batteries, etc.
2. Description
The enclosure is equipped with a mounting plate for mounting electronics/transformers/power supply units. The
enclosure can accommodate a 17Ah/12V battery and it features tampering protection (against unwanted opening). To
enable leading cables into the enclosure, one can buy a cable protection conduit of any length and a cable gland. The
conduits and the cable glands are available at the following codes:
1)
ARAP16P
– cable gland, inside diameter 16 mm – connection between the protection conduit and the enclosure
2)
ARAP21P
– cable gland, inside diameter 21 mm – connection between the protection conduit and the enclosure
3)
MM019
– cable protection conduit , inside diameter 16 mm
4)
MM020
– cable protection conduit, inside diameter 21 mm
The
ARAD3S
enclosure has a space for up to 2x ARAP16P and 5x ARAP21P cable glands.
Optionally,
ARAW45
fans can be mounted. They trigger airflow inside the enclosure after exceeding 45
o
C. One
enclosure can accommodate max. two fan units in the rear part of the enclosure.
