StoneFly DR365-1204 Getting Started Guide
Initial Installation
V8.0.3x
© StoneFly Inc. 2019 | All rights reserved
Page 50
Confirming Setup
To confirm that the
DR365
is configured properly, do the following:
1. Launch your web browser. In the URL address field, type the IP address you set up for
the Management LAN port during the configuration process. Be sure to include
https://
in the address.
The browser will display an alert regarding the security certificate for the site. This
occurs because the IP address for the
DR365
was changed from the factory default
to one appropriate for your network.
2. Follow the screen prompts to accept the certificate. The number of screens will vary
depending on which browser you are using. When the security certificate is accepted, the
DR365
administrative interface login screen will appear.
3. Click on
System
and then
Network
to confirm the network settings.
4. Click on
Data Port
and confirm the settings.
5. Click on
Management Port
and confirm the settings.
6. Click on
Routing
and confirm the settings.
