StoneFly DR365-1204 Getting Started Guide
Initial Installation
V8.0.3x
© StoneFly Inc. 2019 | All rights reserved
Page 28
Steps to use the pre-installed SCVM:
1. The SCVM management network interface is preconfigured with the default IP address of
192.168.0.254. This must be changed to a valid address for your LAN network. Login to the “SC
Service” console using the VMware “Virtual Console” for the SCVM by doing the following:
a.
Press
Enter
to display the login prompt.
b.
At the User ID prompt type
console
and hit
Enter
.
c.
At the password prompt type
coni100o
and hit
Enter
. Note that the User ID and
password are case sensitive.
2. Using the
SC Service
menu, configure the management network by selecting option
2
, for
2
–
Network
.
The default settings are shown below. Adjust settings as needed then
save
the changes.
