StoneFly DR365-1204 Getting Started Guide
Initial Installation
V8.0.3x
© StoneFly Inc. 2019 | All rights reserved
Page 30
2.6.
Hyper-V Management Network Configuration
This section describes configuration of the Hyper-V Management Network.
IP Addresses
and
Hostnames
used in this section are for example only. Refer to Section 2.4 for VMware
Management Network Configuration.
Connect to System console. Attach a keyboard and monitor or use system IPMI KVM.
Launch the console, press
CTRL + ALT + DELETE
and enter the following credentials:
Username:
administrator
Password:
Stonefly1
Go to the
Control Panel
and select
Network and Internet
and then
Network and Sharing
Center
.
