StoneFly DR365-1204 Getting Started Guide
Initial Installation
V8.0.3x
©StoneFly Inc. 2019 | All rights reserved
Page 12
Sliding the Chassis onto the Rack Rails
Warning:
Mounting the system into the rack requires at least
two people to support the chassis during installation. Please
follow the safety recommendations printed on the rails.
Installing the Chassis into a Rack
1.
Extend the outer rails as illustrated above.
2.
Align the inner rails of the chassis with the outer rails on the rack.
3.
Slide the inner rails into the outer rails, keeping the pressure even on both sides.
When the chassis has been pushed completely into the rack, it should click into the
locked position.
4.
Optional screws may be used to hold the front of the chassis to the rack.
Installing the Chassis into a Rack
Note:
The figure above is for illustrative purposes only. Always install servers to the
bottom of the rack first.
Caution:
Do not pick up the server with the front handles.
They are designed to pull the system from a rack only.
