StoneFly DR365-1204 Getting Started Guide
Initial Installation
V8.0.3x
© StoneFly Inc. 2019 | All rights reserved
Page 14
2.3.
Configuring IPMI KVM
The Intelligent Platform Management Interface (IPMI) KVM configuration allows for
Remote
Management
and
Power Control
of the StoneFly DR365 system. This configuration is
optional to perform, but recommended.
To configure the IPMI module, connect a Keyboard and Monitor to the System. Power on the
system and press the “Del” key to enter the BIOS setup.
On the BIOS screen, navigate to the
Advanced
tab and select
IPMI Configuration
. The IPMI
configuration screen will be displayed.
Select
LAN Configuration
. The network settings will be displayed.