Stone Lift Jockey LJS2000, Руководство по обслуживанию и запасным частям

Страница: 30 / 88

- 30 -
MAINTENANCE
WHEN REPLACING TIRES OR
CHANGING TO DUAL WHEEL
C O N F I G U R A T I O N , U S E
MANUFACTURER’S RECOMMENDED
TIRES ONLY. FAILURE TO FOLLOW
THIS WARNING COULD RESULT IN
SERIOUS INJURY OR DEATH.
Changing Single Wheel to Dual Wheel
Standard Machine
1. Jack machine. Apply parking brake.
2. Remove five (5) lug nuts.
3. Assemble inner dual wheel adapter then replace
five (5) lug nuts on adapter wheel and torque to
32 ft. lbs.
4. Assemble outer wheel.
5. Assemble five (5) lugnuts and torque to 32 ft.lbs.
6. Repeat above steps on opposite side of machine.
Quick Release Wheel Option
1. Position machine inner wheel over 2x4 and apply
parking brake.
2. Remove large tee bolt in center of wheel with
crow bar (figure 7).
3. Remove outside wheel with quick-change hub
attached.
4. Repeat above steps on opposite side of machine.
Tires, Lugnuts and Hardware
- Check that all lugnuts are tight weekly using a
torque of 90 ft. lbs. (122 Nm). This is
important on new machines or newly replaced
wheels.
Figure 7
- Inspect all hardware is tight weekly (see
Torque Charts Section).
NOTE: When installing or replacing hardware,
loctite 262 threadlocker is required to prevent
loosening.
Proper Care-- Inspect tires for cuts, slashes, or
bulges. Tires with defects need to be replaced or
repaired for proper handling and safety.
Tires, Lugnuts, Hardware/Changing
Wheel/Quick Release Wheel
WARNING