Stone Lift Jockey LJS2000, Руководство по обслуживанию и запасным частям

Страница: 29 / 88

- 29 -
MAINTENANCE
5. Next tighten nuts on reverse control to tighten
cable at pump control bracket. Squeeze reverse
handle grip and check for 1/16” clearance
between pump control bracket and forward
control lever. Continue to adjust control cable
until only a 1/16” can fit between the pump
control bracket and forward control lever.
DO NOT ATTEMPT ANY ADJUSTMENTS
WHILE MACHINE IS RUNNING.
DO NOT MODIFY OR TAMPER WITH
STOPS FOR CONTROL LEVERS.
FAILURE TO FOLLOW THIS WARNING
COULD RESULT IN SERIOUS INJURY OR
DEATH.
WARNING
WARNING
WARNING
Transmission Adjustment/
Brake Adjustment
Brake Adjustments
Brakes are adjusted at factory and will need to be
adjusted as brake shoes wear. Check operation daily.
Adjust at 25 hours then as needed.
Service Brake Adjustment-- Brake adjustment rods
need adjusting in equal amounts. Jack machine up so
that front tire is off ground. Remove clevis pin from
yoke. While screwing yoke, keep count of number of
turns for repeating the same procedure on other side
until brake is adjusted.
Parking Brake Adjustment --Turning the knob on
the parking brake handle clockwise can make fine-
tuning to the parking brakes.
Brake Adjustment
Rods