STOLTZFUS SPREADERS TSC0S5, Руководство пользователя

Страница: 16 / 40

End of Season Storage
1. Clean all material out of the hopper.
Sand and paint
all
bare
spots.
2. Perform m a i n tenance and lubrication outlined above.
3. Check chain
tension
If drag
chain
is near the point of maximum adjustment back off chain tightener all the
way. Remove
as many links as
necessary.
Note: Remove links in pairs only. Tighten to proper adjustment.
If roller
chain s show
excessive wear or
missing
rollers replace
entire section of
roller chain.
4. Check all bearings.
lf
shaft can be moved 1/32"
in
the bearing. replace
the
bearing.
5. Check sprockets.
Steel
sprockets that are worn to a sharp
point
should be
replaced.
Cast
iron
sprockets
that show excessive wear should be replaced
6.
Check W
heel Bearings
(Note: Do NOT remove wheel hubs with wheels and tires attached)
Thoroughly
clean
all the parts in solvent and check for rough bearings or cracked
spindles Clean and inspect
the
brake drums, linings
and
mechanisms
(when
applicable)
Repack bearings by squeezing grease between the rollers. Do not overtighten spindle
nut when reassembling.
7.
Store out of weather
Spreaders should be stored under a roof
i f
possible. Do not store with the tarp on as
condensation will occur.
.
8. If spreader is stored outside:
Daily and weekly lubrication recommendations should he performed once a month if
the spreader is stored out in the open.