STOLTZFUS SPREADERS TSC0S5, Руководство пользователя

Страница: 13 / 40

Section 5 - LUBRICATION AND MAINTENANCE
Grease Zerks
One or two shots with a hand-held grease gun
1S
sufficient
to lubricate and to keep dust and moisture out of the
bearings.
DO NOT OVER -LUBRICATE
This may force out bearing seals allowing dust and moisture
to en ter and thus cause excessive wear.
Rol ler Chains
Soak all roller chains in #30 engi ne oil
Chain tighteners
These are the spring loaded tighteners on the roller cha ins. Free
any frozen tighteners
Drag Chain Slack
This is done b y measuring the distance from the front idler
shaft
to
the point where the drag chain touches th e return
track A distance of 1 8 inches should be maintained between
these two points Adjust the chain accordingly to obtain the
right
measurement. Be sure both sides are adjusted equally
Gear box es
Fill to prope r- level with
SA.E
#90
gear oil