Stoelting Flavor Burst, Руководство оператора

Страница: 27 / 76

24
Installing the Blending System
1. Install the spout adapter assembly,
complete with o-rings, onto the freezer
spout. Push up on the adapter with your
palm until it snaps on. Ensure it is evenly
and fully installed.
2. Place the Blending Assembly onto the
suspension bracket, so that the Gear Box
post slides into the bracket opening. Install
the Blending Head fully over the spout
adapter.
3. Push up on the Blending Assembly and lift
the locking collar up and over the adapter
tabs. Rotate the locking collar over the tabs
to secure.
4. Connect the Drive Motor cable to the Motor.
5. Ensure the Blending Assembly is resting
level and horizontal. Install and tighten the
Gear Box nut to secure the assembly.
6. Insert the syrup line manifold end fully into
the Blending Head syrup line opening.
Rotate it until motion stops to secure.
7. With a container under the dispensing
spout, press the FLUSH SPOUT key on the
Touch Panel to purge any remaining
product from the spout.
NOTE: IF NO “FLUSH SPOUT” BUTTON IS
SHOWN ON THE SCREEN, YOU CAN
ACCESS THE KEY UNDER THE “FLUSHING
FUNCTIONS” SECTION OF THE
MAINTENANCE MENU.