Stoelting Flavor Burst, Руководство оператора

Страница: 64 / 76

61
2. Connect the power cord to the port on the
back panel.
3. Plug the power cord into an outlet.
4. Activate the unit by pressing the “
| ” end of
the switch.
6. Turn on the Touch Panel by pressing the
small round black power button on the back
casing of the Touch Panel. There is also a
smaller power button between the casing
and the screen.
7. Most likely, settings on the Touch Panel will
need to be adjusted according to the
operator’s preference. Serving modes,
flavor timing, serving sizes, changing the
menu flavor names and more features are
outlined in the TOUCH PANEL
OPERATIONS MANUAL. For the initial set-
up, however, proceed with the rest of this
section before making those adjustments.
Filling the Sanitizer Tank
For day-to-day operations, use Flo-San®
sanitizer mixed according to the manufacturer’s
instructions in the sanitizer tank. The tank
system delivers solution to specific areas of the
Flavor Burst
®
system such as the Blending
Head and syrup lines during certain
functions. Therefore, check the tank levels on a
daily basis. For proper sanitation, use only
FRESH sanitizer solution in the tank that is no
more than 28 days old. Replace older solution
with fresh sanitizer solution.
1. Prepare approximately 2 gallons (7.5 liters)
of approved sanitizer solution according to
manufacturer’s instructions.
2. Disconnect the sanitizer tank from the
sanitizer line.
3. Remove the sanitizer tank from cabinet.
4. Remove the sanitizer tank’s cap.