Stoelting AUTOVEND, Руководство оператора, Страница: 13 / 25

Owner’s Manual #513698 Rev.1 7 AUTOVEND Model Machines
4. Wipe lubricant off of the hex end of the augers with
a paper towel. Remove the rear seal assemblies
(Fig. 2-10).
5. Wipe any excess lubricant off the rear seals.
6. Unscrew the springs from the auger fl ights.
C. DISASSEMBLING TOPPING ASSEMBLY
The topping assembly must be disassembled, cleaned and
sanitized prior to use. Frequency of cleaning the topping
assembly must comply with the local health regulations.
1. Remove the cones and covers from the topping
chutes.
2. Push the bin backwards so that the pins disengage.
3. Tilt the bin to the side and back.
4. Pull bin forward to disengage the motor from the
auger.
5. Each bin has an auger assembly that must be
disassembled for cleaning. Unscrew the ends
and remove the auger.
6. The bin on the far left also has an agitator that must
be removed for cleaning. The agitator consists
of a gear and two springs. To remove, press the
bin ends inwards to bow the sides outward, then
twist the agitator to disengage.
D. REMOVE TRAYS
The machine has a drip tray and a topping overfl ow that
need to be removed for cleaning.
Figure 2-10 Rear Seal
Bin Cover
Chute Cone
Chute Cover
Bin
Bin Cover
Chute Cone
Chute Cover
Bin
Figure 2-11 Topper Assembly
Push Back to Disengage Pins Push Back to Disengage Pins
Figure 2-12 Disengage Topping Bin Pins
Tilt to the Right
and Back
Tilt to the Right
and Back
Figure 2-13 Tilt Bin to Remove
Drip Tray
Topping Overflow
Drip Tray
Topping Overflow
Figure 2-15 Trays
Figure 2-14 Topper Bin Assembly