Page 17
Due to continuous product research and development,
the information contained herein is subject to change without notice.
www.stoddart.com.au
www.stoddart.co.nz
1� Isolate from the power supply
2� No organic solvent cleaners should be used on glass/polycarbonate
3� Remove night lids and wash using a clean cloth dampened (not wet) with clean warm soapy water until all soil has been removed
4� Clean the glass with a glass cleaner or warm (not hot) soapy water, and a sponge, wiping dry with a squeegee is best
5� Door frames should be cleaned as any other stainless steel or metal surface
6� Doors seals should be checked for cracks before cleaning
7� Clean using a clean cloth dampened (not wet) with clean warm soapy water until all soil has been removed
8� Thoroughly wipe dry with a soft cloth after cleaning, do NOT allow to air dry� Do NOT let water pool, check crevices and folds
Doors/Night Lids
1� Use a vacuum to remove dust and debris from all the ventilation panels
2� Do NOT use water or a hose to remove dust or debris
Ventilation Panels
Refrigerator
1� Isolate the unit from the power supply
2� Remove metal shelves/racks/runners/vent covers
3� Wash the shelves/racks/vent covers separately in a dishwasher or kitchen sink, thoroughly wipe dry after cleaning, DO NOT allow to air
dry
4� Clean the refrigerator section using a clean cloth dampened (not wet) with clean warm soapy water until all soil has been removed
5� Thoroughly wipe dry with a soft cloth after cleaning, do NOT allow to air dry� Do NOT let water pool, check crevices and folds
External Surfaces
1� Isolate from the power supply
2� Using a clean cloth dampened (not wet) with clean warm soapy water until all soil has been removed
3� Using a clean sanitised cloth, thoroughly wipe the stainless steel and metal parts dry� Do NOT let water pool on the unit� Check crevices
and folds
Cleaning and Maintenance