background image

Page 6

Due to continuous product research and development,
the information contained herein is subject to change without notice.

www.stoddart.com.au
www.stoddart.co.nz

Installation

Setting Up

Handling

Unpacking

Positioning

•  Use suitable means to move the unit;  

- For smaller items use two people 
- For large items a fork lift, pallet trolley or similar (the forks should reach completely beneath the pallet)

•  Check the unit for damage before and after unpacking�  If unit is damaged, contact the distributor and manufacturer
•  Should any item have physical damage, report the details to the freight company and to the agent responsible for the dispatch within 

seven (7) days of receipt�  No claims will be accepted or processed after this period

•  The unit is supplied fully assembled
•  Remove all protective plastic film, tapes, ties and packers before installing and operating
•  Clean off any remaining residue from the interior/exterior of the unit using a clean cloth dampened with warm soapy water

•  When moving the unit, ensure the cabinet is upright at all times 
•  When positioning the unit, avoid direct sunlight, warm drafts and heated areas for the unit to maintain the normal operating 

temperature

•  Do not position the unit in: 

  - Wet areas 
  - Near heat and/or steam sources 
  - Near flammable substances

•  Ensure the unit is positioned on a level surface to allow all the condensation to properly burn off and prevent the burn off tray 

overflowing

•  Allow an air gap between the unit and other objects or surfaces�  A minimum gap of 100mm from all sides is recommend for normal 

operational use (if the unit is near any heat sensitive material we suggest you allow additional space), example below

•  After positioning the unit, allow the refrigeration gas to settle for at least 2 hours before switching ON

•  Please consult national and local standards to ensure that your unit is positioned in accordance with any existing requirement

WARNING

Improper installation, adjustments, alterations, service or 

maintenance can cause property damage, injury or death.

100mm

APPLIANCE

100mm

100mm

Front

Содержание CR.GC1.L.RC.L

























Отзывы: