background image

 10 

10 .1  Fitting to a vehicle or parent machine                  

Safe lifting practice to be observed when handling the machine as the net weigh is over 25kg                                 

Safety shoes and protective gloves to be worn when handling the machine                                                  

With a full hopper the 65L machine could weigh in excess of  80kg and the 130L machine 135kg and so ensure 

the machine is securely attached to a suitably strong rigid mounting point.  If unsure seek advise from the   

parent machine manufacturer or supplier.  Locally fabricated mounting frames are not the responsibility of 

Stocks AG Ltd    

NOTE

 the machines can be operate facing forwards or backwards.                                                                      

Ensure the disc height is a minimum of 1 metre above the crop canopy or the ground 

– more height 

may improve the maximum spread width.                                                                                           

Ensure the power cable is connected direct to the parent vehicle 12v battery and the fuse is fitted correctly. 

Always adhere to Health and Safety guidelines when mounting or fabricating an appropriate 

mounting frame and always wear suitable protective clothing. 

10.2   Optional ATV Fitting kit   

ATV fitting Kit available;  Part No. FJ-005-BKT     (available through your local dealer) 

The Stocks ATV Kit provides a quick and easy way to attach your Fan Jet to the rear carrier of your ATV.            

Designed as a universal fitment to elevate the Fan Jet to gain more height to the spinning disc.                              

The formed steel base plate with quick fit clamps and jacking screws to mount the machine to the base plate 

and to adjust the angle of the disc when the ATV is fully laden. The kit includes an operator protection plate 

which bolts onto the back frame of the machine and a short power and connector cable to maximise the power 

at the disc motor. These are to be fitted rather than the standard cables supplied with the Fan Jet machine.   

Not recommend for 130 Litre machines if applying Slug Pellets or similar dense products                       

10.3   Optional UTV Fitting kit      

UTV fitting Kit available;   Part No. FJ-005-UTV     (available through your local dealer) 

The cost option UTV kit available for most UTV fitments  
Offering a sturdy fitting option with 4 hooked anchor points with hand release fittings.     
One piece tubular steel construction with detachable machine mounting plate.  
Fixed fork lift point safe and easy lifting on and off of vehicle.    

Содержание FAN JET PRO 130





























Отзывы: