Stocks AG FAN JET PRO 130, Оригинальное руководство по эксплуатации и список запасных частей, Страница: 16 / 28

16
16.1 Setting the feed rate
To adjust the feed rate, undo the black plastic locking knob at the centre rear of the hopper and slide the feed
regulator plate to the required setting, reading from the 0-10 scale decal. Re-tighten the locking knob.
Position 10 is the highest feed rate with the feed apertures fully open as shown in the photo below
Note - we recommend you carry out your own product calibration test for each product and application rate.
Feed scale
16.2 Setting the spread bias (Factory set at 90
degrees)
The complete feed mechanism can be rotated to bias the spreading arc to the left or right, and even out the
spread pattern equally from the centre-line of the machine for in-field work, and as a headland control at field
borders. To adjust, undo the black plastic locking knob on the side of the machine and using the stainless steel
motor cover, rotate the complete circular mechanism as far as required, moving the indicator dimple in the
direction in which you want the arc to swing. Re-tighten the locking knob.
Locking Knob
Locking
Knob