Stocks AG FAN JET PRO 130, Оригинальное руководство по эксплуатации и список запасных частей

Страница: 18 / 28

18
18.1 Setting the headland deflectors
WARNING
Ensure the power supply has been disconnected before adjusting any deflector plates or fitting the calibration
chute. Always wear the appropriate protective clothing.
Adjustable deflectors that reduce the exit aperture from the disc are incorporated into the Fan Jet to physically
limit the spread width for headland control.
Undo the black plastic knob at the rear of the chassis and slide each deflector around the disc as far as required
to prevent chemical granules from entering a watercourse of grass margin. Tighten the knob. NOTE If using a
Vario control console, this can be used by itself or in conjunction with the deflectors, and the bias adjustment.
18.2 OPTIONAL Calibration Chute
Part No. FJ-004-CAL
This calibration chute enables product spinning off the disc to be collected more safely
Always wear the appropriate protective clothing for the product being used .
If calibrating with slug pellets, or any other pesticide, please ensure that the any spilt product is collected
Immediately and put back in its original container as soon as the calibration process has been completed
Do not allow slug pellets or other pesticides to contaminate water supplies .