Stocks AG FAN JET PRO 130, Оригинальное руководство по эксплуатации и список запасных частей

Страница: 13 / 28

13
13.1 Electrical connections
Power requirement is 12 volts with a minimum continuous 20amp
supply.
The Fan Jet is supplied with a control console and all wiring
Ensure the power supply cable is connected direct to the vehicle
battery to ensure maximum power.
Connect the positive wire (fused) to the positive (+) terminal and negative earth connection to the negative (-)
terminal. The disc should rotate in a clockwise direction when viewed from above
WARNING Failure to connect to the vehicle battery may result in control function problems and possible
damage to the vehicle battery and charging system must be in good condition to achieve the best results.
All cables and controls are fitted with matching plugs and sockets. Extension cables available (please enquire)
WARNING any modification to the wiring, fuse holder or controls will invalidate any warranty claim
and may affect the performance of the Fan Jet.
Always replace any blown fuse with the same amp rated blade type fuse as the original one fitted.
13.2 Control panel
1. Main Power Switch
2. Feed Mechanism Switch
NOTE the feed switch will not operate without the disc motor running.
3. 12-position dial (3) Vario control console only used to increase or decrease the speed of the disc.
Can be used to match the spread width to an implement or bout width. Also useful when applying slug
pellets to a 12m working width or broadcasting seeds ( see section 18-1 )
Both panels are supplied with self-adhesive Velcro strips to attach the console to a suitable surface.
WARNING Ensure the position and operation of the control panel does not affect the visibility
of the operator or the ability to control the parent machine.
13.3 Remote switch facility
The spare “ White wire ” from the control panel can be earthed to negative (-V) via a suitable remote switch to
offer remote feed shutter operation if required. This wire not connected in normal working situations.
WARNING
DO NOT connect the “White wire” to positive (+V) as this will damage the panel and invalidate
warranty
CONTROL PANEL- VARIABLE DISC SPEED CONTROL PANEL- FIXED DISC SPEED
1
Pt No. FJ117B Pt No. FJ114B
O
I
O
I
1. Main Power and
Disc ON-OFF Switch
1. Main Power and
Disc ON-OFF Switch
2.Feed Shutter ON-
OFF Switch
3
. Variable Disc Speed
Dial
2.Feed Shutter ON-
OFF Switch