manualshive.com logo in svg

Stober EZ, Руководство пользователя

Поделиться
Скачать
Stober EZ Скачать руководство пользователя страница 126

5.5.6 

Mounting positions

The following table shows the standard mounting positions.

The numbers identify the gear unit sides. The mounting position is defined by the gear side facing down-
wards.

EL1

IMB3, IMB5, IMB14, IMB34, IMB35

EL2

IMB8

EL3

IMB7

EL4

IMB6

EL5

IMV1, IMV5, IMV18

EL6

IMV3, IMV6, IMV19

Since the lubricant filling volume of the gear unit depends on the mounting position, the mounting position
must be specified when ordering.

5.5.7 

Lubricants

STOBER fills the gear units with the amount and type of lubricant specified on the nameplate. The filling vol-
ume and the structure of the gear units depend on the mounting position.

Only install the gear units in the intended mounting position! Reposition the gear units only after consulting
STOBER. Otherwise, STOBER assumes no liability for the gear units.

You will receive lubricants for use in the food industry upon request.

5.5 Product description 

5 C helical geared motors

126

Содержание EZ













































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды