Hardware layout and configuration
UM1855
26/100
DocID027351 Rev 3
For configuration elements related with the RS-232 port operation, refer to
Table 6
and
Table 9
.
Section 2.10
brings information on using the LPUART port of STM32L476ZGT6 for RS-232,
instead of its USART1 port.
2.9.2 IrDA
port
The IrDA communication port uses an IrDA transceiver (U11).
Table 9
shows the
configuration elements related with the IrDA port operation
.
2.9.3 Limitations
The operation of RS-232 and IrDA ports is mutually exclusive. The operation of either port is
also mutually exclusive with the NFC peripheral operation.
2.9.4 Operating
voltage
The RS-232- and IrDA-related operating supply voltage of STM32L476ZGT6 (VDD line)
must be within the range from 1.71 V to 3.6 V.
2.10 LPUART
port
On top of USART1 port for serial communication, the STM32L476ZGT6 offers LPUART, a
low-power UART port.
Table 9. Settings of configuration elements for RS-232 and IrDA ports
Element
Setting
Description
JP15
JP15
Default setting.
RS-232 selected: PB7 port of STM32L476ZGT6 receives signal
originating from RXD terminal of CN9.
JP15
IrDA selected: PB7 port of STM32L476ZGT6 is connected with RxD
terminal of the IrDA transceiver U11.
JP15
NFC selected: PB7 port of STM32L476ZGT6 receives NFC_IRQOUT
signal from NFC peripheral.
Section 2.28
provides more detail on the
NFC peripheral.
R93, R118,
R116
In
Required for IrDA operation
R158, R119
Out
Required for IrDA operation
3
1
5
4
6
2
3
1
5
4
6
2
3
1
5
4
6
2
