24
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: STR-BGC PRODUCT CODE: 60165 06/2018
Instructions
Before first use
• When your new gas cooktop has been professionally installed, please
take the time to read this manual thoroughly to familiarise yourself with the
appliance. Pay particular attention to the safety instructions on pages 5–7.
• Clean the cooktop surface as described in the “Care and cleaning”section.
• Check and ensure the cooktop is securely plugged into an appropriate
wall outlet and power is switched on to the outlet.
The cooktop
• The control panel at the side of the cooktop has four
control knobs, one for each burner; the small diagram to
the right of each knob (Fig. 12) illustrates which burner it
controls.
• The following symbols will appear on the control panel,
next to each control knob:
OFF: Gas off
Large flame: HIGH (maximum) setting
Small flame: LOW (minimum) setting
• The minimum setting is at the end of the anticlockwise
rotation of the control knob.
• All operation positions must be selected between the maximum and
minimum position.
• Never select a knob position between the maximum and off position.
Lighting a burner
• Press down the control knob gently and turn it anticlockwise to the
HIGH
position. When the burner lights, keep the knob depressed for
approximately 20 seconds to ensure it stays lit when released.
NOTE:
You can use matches to light the burners in the event of a power
failure.
• Turn the knob to the required position, anywhere between the
HIGH and
LOW settings. Do NOT set it between OFF and HIGH.
• In the event of a burner flame being accidentally extinguished, turn off the
burner control
and wait for at least one minute before reigniting it
.
• After use, always turn the control knob fully clockwise to the gas off
position.
Fig. 12
