12
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: STR-BGC PRODUCT CODE: 60165 06/2018
Clearances required
This appliance
is to be built into a kitchen unit (depending on size) or 600mm
worktop, providing the following
minimum distances
are allowed:
• The edges of the cooktop must be a minimum distance of
55mm
from a
side or rear wall.
• 700mm
between the highest point of the cooktop surface (including the
trivets) and the underside of any horizontal surface directly above it.
• 400mm
between the cooktop surface, providing that the underside of
the horizontal surface is in line with the outer edge of the cooktop. If the
underside of the horizontal surface is lower than 400mm, then it must be
at least 50mm
away from the outer edges of the cooktop.
• 50mm
clearance around the appliance and between the cooktop surface
and any combustible materials.
• Fire resistant materials
(such as ceramic tiles) are required up to 450mm
above the burner top.
Installation (Cont.)
Clearances required when fitting the
cooktop
without
a rangehood.
Clearances required when fitting the
cooktop
with
a rangehood.
*
see below
Rangehood
Fig. 1
