18
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: STR-BGC PRODUCT CODE: 60165 06/2018
Installation (Cont.)
Installing the gas regulator
• When installing the gas regulator, ensure that its valve outlet thread
matches the thread of the gas connector.
• Use an appropriate sealant around the threads.
• Ensure that the gas regulator valve installation location is perpendicular.
• After installation, open the gas source switch and check the valve body
connections with soap and water for leaks.
Converting the gas regulator for use with LPG
This cooktop is fitted out for use with Natural Gas (NG). If it is to be used with
liquefied petroleum gas (LPG), the gas regulator valve has to be converted.
• Using special tools, open the cover of the gas regulator valve by turning it
anticlockwise (Fig. 9-A, page 19).
• Remove the adaptor from the top cover (Fig. 9-B).
• Pull out the adaptor, invert it and replace the top cover (Fig. 9-C).
• Invert the assembled adaptor’s top cover and replace the regulator valve
(Fig. 9-D).
NOTE:
Do not adjust the regulator valve body piece in the above procedure,
otherwise it will affect the performance parameters set in the factory.
WARNING:
• The regulator valve outlet pressure is set at the factory, please do not
adjust it in order to avoid the occurrence of safety accidents.
• If you find any abnormality of the regulator valve, stop using the appliance
and contact our after sales support centre for advice.
Do not attempt any
maintenance yourself
.
Performance parameters
NG
LPG
Operating temperature
–20°C to 60°C
Inlet pressure setting
6 in.wc
11 in.wc
Outlet pressure
5±0.3 in.wc
10±0.5 in.wc
Inlet side screw
1/4 NPT
Outlet side screw
1/4 NPT
