Still iGo neo CX-20 Скачать руководство пользователя страница 94

Страница: 94 / 112

Maintenance

Maintaining the iGo neo

This section contains all of the information

required for maintaining the iGo neo. Mainte-

nance must be performed in accordance with

the points in the maintenance checklist. This is

the only way guarantee that the truck remains

ready for operation; it is also a pre-condition

for any warranty claims.

Maintenance schedule

Maintenance tasks on the components for

the

ASSISTANCE

mode of the iGo neo must

be performed in addition to the scheduled

maintenance of the series-production truck.
The intervals are deﬁned for standard use.

Shorter maintenance intervals can be deﬁned

in consultation with the operating company,

depending on the application conditions of the

truck.
The following factors may necessitate shorter

maintenance intervals:
• Dirty, poor-quality roadways
• Dusty or salty air
• High levels of air humidity
• Extremely high or low ambient tempera-

tures, or extreme changes in temperature

• Multi-shift operation with a high duty cycle
• National regulations for the truck or for

individual components

Responsibility for maintenance

DANGER

Work performed by unauthorised persons on com-

ponents used for

ASSISTANCE

mode jeopardises

the safety functions of the truck.
To maintain components used for

ASSISTANCE

mode, contact the authorised service centre.

Maintenance work on components used for

ASSISTANCE

mode must only be performed

by the service centre authorised by the

manufacturer.
The service engineer must have received spe-

cial training from the manufacturer regarding

the handling processes, technology and repair

50108046085 EN - 08/2017

Содержание iGo neo CX-20

















































































































Результаты поиска

Содержание iGo neo CX-20

Отзывы:

Похожие инструкции для iGo neo CX-20

Бренды по названию

Популярные бренды

Still iGo neo CX-20, Инструкции к добавке

Результаты поиска

Содержание iGo neo CX-20

Отзывы:

Похожие инструкции для iGo neo CX-20

Бренды по названию

Популярные бренды