Still iGo neo CX-20 Скачать руководство пользователя страница 22

Страница: 22 / 112

Safety

Deﬁnition of terms used for responsible persons

Duties of the operating company

The operating company is the natural or legal

person or group who uses the truck or on

whose authority the truck is used.
The operating company must ensure that the

truck is only used for its intended purpose and

in compliance with the safety regulations in

these operating instructions and the operating

instructions for the series-production truck.
The operating company must ensure that

all users read and understand the safety

information in these operating instructions

and in the operating instructions for the

series-production truck. Both sets of operating

instructions must be accessible to the truck

operator at all times.
The operating company is responsible for

scheduling and correctly performing regular

safety inspections, including safety inspec-

tions on the components used for

ASSIS-

TANCE

mode.

The requirements for the operating com-

pany—as well as the rights, duties and rules

of behaviour of the operating company—as

described in the operating instructions of the

series-production truck also apply to trucks

with the additional

ASSISTANCE

mode of

operation.
In addition, the following provisions apply:
• As part of safety training, the operating

company must instruct the operator on how

to handle the truck in

ASSISTANCE

mode.

This information applies in particular for the

different methods of handling the truck in

the

MANUAL

and

ASSISTANCE

modes of

operation.

• The operating company must instruct all

affected personnel in the safe handling of a

truck in

ASSISTANCE

mode.

• The operating company is responsible for

ensuring the safe condition of roadways

(refer to the chapter entitled "Suitable

roadways").

• The operating company must ensure that

the truck is only operated by persons

50108046085 EN - 08/2017

Содержание iGo neo CX-20

















































































































Результаты поиска

Содержание iGo neo CX-20

Отзывы:

Бренды по названию

Популярные бренды

Still iGo neo CX-20, Инструкции к добавке

Результаты поиска

Содержание iGo neo CX-20

Отзывы:

Бренды по названию

Популярные бренды