Still iGo neo CX-20 Скачать руководство пользователя страница 53

Страница: 53 / 112

Operating the iGo neo

Checks and tasks to be carried out when commencing ASSISTANCE mode

– Report defects to the supervisory person-

nel. Do not use the truck until it has been

properly repaired

Visual inspection and brake test after

switching on ASSISTANCE mode

Safety brake test after switching on

ASSISTANCE mode

After switching on

ASSISTANCE

mode, a

check must be performed to ascertain whether

the truck automatically stops in front of an

obstacle.
– Stop the truck in front of an unobstructed,

straight section of roadway.

– Place a suitable test object (with an edge

length and height of at least 20 cm) one

metre in front of the truck.

– Move off the driver's platform and move

the truck using the remote control so that it

approaches the test object.

The truck must automatically come to a

standstill just in front of the obstacle. Once

the truck stops, the LED signalling unit and

the warning buzzer emit the "Emergency stop"

signal.
– Report defects to the supervisory personnel

and do not use the truck until it has been

properly repaired.

Visual inspections after switching on

ASSISTANCE mode

After switching on

ASSISTANCE

mode,

the operator must check the following truck

functions during operation:
• During operation, check that the truck

responds correctly to entries made with

the remote control.

• During operation, check that the warning

signals and information signals function in

ASSISTANCE

mode.

The signals are part of the safety concept of

the truck. These signals provide important

information for people in the working area

50108046085 EN - 08/2017

Содержание iGo neo CX-20

















































































































Результаты поиска

Содержание iGo neo CX-20

Отзывы:

Still iGo neo CX-20, Инструкции к добавке, Страница: 53 / 112

Результаты поиска

Содержание iGo neo CX-20

Отзывы: