Still iGo neo CX-20 Скачать руководство пользователя страница 58

Страница: 58 / 112

Operating the iGo neo

Safety regulations in ASSISTANCE mode

Transport of people and jumping onto

the truck prohibited when operating in

ASSISTANCE mode

DANGER

Risk of injury for persons when travelling as a pas-

senger or when jumping onto the truck in ASSI-

STANCE mode
While the truck is being controlled via movement

tracking or by using the remote control, only the

operator is permitted to stand in the working area of

the truck. If people ride the truck as passengers or

jump onto the truck, they are at risk of falling down

or interrupting operation of the truck.
– In

ASSISTANCE

mode, do not travel on the

truck as a passenger or jump onto the truck.

Risk of accident due to smoke in the

event of ﬁre

DANGER

Risk of accident due to optical safety systems being

rendered inactive by smoke in the event of ﬁre
The optical assistance systems (safety laser scan-

ner, movement tracking sensors) can be affected

by smoke in the event of ﬁre.
– Do not operate the truck in

ASSISTANCE

mode

if there is smoke in the area surrounding the

truck.

Safe storage of the remote control

DANGER

Risk of accident if the remote control is actuated by

anyone other than the operator
If anyone else actuates the remote control, the truck

may move unexpectedly and injure people.
– Never give the remote control to anyone else

while you are working. The remote control may

only be operated by the operator.

– Never leave the remote control unattended while

you are working. Always wear the remote control

on your arm in the supplied holder.

– Once work has been completed, ensure that

the remote control cannot be accessed by

unauthorised persons.

50108046085 EN - 08/2017

Содержание iGo neo CX-20

















































































































Результаты поиска

Содержание iGo neo CX-20

Отзывы:

Похожие инструкции для iGo neo CX-20

Бренды по названию

Популярные бренды

Still iGo neo CX-20, Инструкции к добавке

Результаты поиска

Содержание iGo neo CX-20

Отзывы:

Похожие инструкции для iGo neo CX-20

Бренды по названию

Популярные бренды