Still FXD 20 Скачать руководство пользователя страница 79

Страница: 79 / 162

WARNING

Be aware of the position of the drive wheel.
Slowly start the truck.
Check the position of the drive wheel on the display.

NOTE

Always depress the pedal slowly, as the truck

reacts immediately. Abrupt starts or braking,

or sudden reversal of the drive direction, must

be avoided at all costs.

NOTE

The truck accelerates in proportion to the

pressure exerted on the accelerator pedal.

The operator selects the direction of travel us-

ing the drive switch located on the joystick:

●

Forward travel (1)

●

Reverse travel (2)

–

Put the truck into service

Forward travel

–

Push the drive switch down (1) to travel for-

wards (in the opposite direction to the

forks).

–

Press the accelerator pedal (4).

Reverse travel

–

Push the drive switch up (2) to travel back-

wards (in the direction of the forks).

–

Press the accelerator pedal (4).

WARNING

Restricted visibility
During reverse travel, visibility may be restricted. Be

very careful. Make sure that the path behind is clear

before travelling in reverse.

Reversing the direction of travel

–

Keep the accelerator pedal (4) depressed.

–

Push the drive switch down (1) or up (2).

–

Push the drive switch (3) in the opposite di-

rection.



Use

Driving: Single-pedal option

11648011751 EN - 02/2021 - 06

Содержание FXD 20



































































































































































Результаты поиска

Содержание FXD 20

Отзывы:

Похожие инструкции для FXD 20

Бренды по названию

Популярные бренды

Still FXD 20, Оригинальное руководство пользователя

Результаты поиска

Содержание FXD 20

Отзывы:

Похожие инструкции для FXD 20

Бренды по названию

Популярные бренды